欢迎您光临济南苏鑫电缆桥架有限公司网站!
联系济南苏鑫电缆桥架有限公司 / Contact us

济南苏鑫电缆桥架有限公司

客户咨询热线

0531-85767688

售后热线:15668327566

联系基地:山东省 德州市协同发展产业园D06幢

山东电缆桥架:工地铝合金桥架需要做复检吗

文章来源:https://www.sddlqj.cn/   作者:电缆桥架厂家发布时间:2025-12-10 浏览次数:1

返回:行业动态

  电缆桥架是否需要复试送检,主要取决于工程要求、当地规范及监理或建设方的具体规定。以下是综合分析:

  Whether cable trays need to be retested and inspected mainly depends on the engineering requirements, local regulations, and specific provisions of the supervisor or construction party. The following is a comprehensive analysis:梯级式桥架-001

  一般要求

  General Requirements

  电缆桥架在工程中使用前,通常需要提供第三方检测报告,以确保其质量符合标准。检测项目可能包括锌层附着力、厚度、均匀性、冲击试验、耐火等级等,具体根据工程需求确定是否全检。例如,防火桥架因涉及消防验收,往往需复检耐火性能。

  Before using cable trays in engineering, a third-party inspection report is usually required to ensure that their quality meets the standards. The testing items may include zinc layer adhesion, thickness, uniformity, impact testing, fire resistance rating, etc. Whether to conduct a full inspection will be determined based on engineering requirements. For example, fire-resistant cable trays often require re inspection of their fire resistance performance due to the involvement of fire safety inspections.

  规范依据

  Standard basis

  标准如《电控配电用电缆桥架》(/T 10216-2013)和《建筑电气工程施工质量验收规范》(GB 50303-2023)明确桥架的板材厚度、防腐层及耐火性能等要求,部分项目需抽样送检。

  National standards such as "Cable Trays for Electrical Control and Distribution" (/T 10216-2013) and "Code for Acceptance of Construction Quality of Building Electrical Engineering" (GB 50303-2023) specify the requirements for the thickness, anti-corrosion layer, and fire resistance of cable trays, and some projects require sampling and inspection.

  地方规范(如天津的DB/T29-209-2020)可能对桥架复检有额外要求,需结合当地住建部门或质监站的规定执行。

  Local regulations (such as DB/T29-209-2020 in Tianjin) may have additional requirements for the re inspection of cable trays, which need to be implemented in conjunction with the regulations of the local housing and construction department or quality supervision station.

  特殊情况

  special circumstances

  防火桥架:若设计或监理要求,必须复检耐火极限及涂层附着力。

  Fireproof bridge: If required by the design or supervision, the fire resistance limit and coating adhesion must be rechecked.

  镀锌桥架:检测锌层厚度(如65μm)及附着力,避免因腐蚀影响性。

  Galvanized bridge frame: Focus on testing the thickness of the zinc layer (such as 65 μ m) and adhesion to avoid affecting safety due to corrosion.

  新工艺或争议材料:生产厂家变更工艺或材料时,需重新检测以验证合规性。

  New processes or disputed materials: When the manufacturer changes the process or material, retesting is required to verify compliance.

  验收流程

  Acceptance process

  进场时需核查合格证、型式检验报告,并按批次抽样(如每3000米抽3段)送CMA资质机构检测。复验不合格的批次需退场处理。

  When entering the site, it is necessary to verify the certificate of conformity and type inspection report, and sample according to batches (such as 3 sections per 3000 meters) and send them to CMA qualification institutions for testing. The batches that fail the re inspection need to be removed from the site for processing.

  结论:桥架是否需要复试送检需结合工程重要性、当地规范及监理要求综合判断。建议提前与相关部门沟通,明确检测项目和标准,避免验收争议。电缆桥架是否需要复试送检,主要取决于工程要求、当地规范及监理或建设方的具体规定。以下是综合分析:

  Conclusion: Whether the bridge frame needs to be retested and inspected should be comprehensively judged based on the importance of the project, local regulations, and supervisory requirements. It is recommended to communicate with relevant departments in advance to clarify the testing items and standards, in order to avoid acceptance disputes. Whether cable trays need to be retested and inspected mainly depends on the engineering requirements, local regulations, and specific provisions of the supervisor or construction party. The following is a comprehensive analysis:

  一般要求

  General Requirements

  电缆桥架在工程中使用前,通常需要提供第三方检测报告,以确保其质量符合标准。检测项目可能包括锌层附着力、厚度、均匀性、冲击试验、耐火等级等,具体根据工程需求确定是否全检。例如,防火桥架因涉及消防验收,往往需复检耐火性能。

  Before using cable trays in engineering, a third-party inspection report is usually required to ensure that their quality meets the standards. The testing items may include zinc layer adhesion, thickness, uniformity, impact testing, fire resistance rating, etc. Whether to conduct a full inspection will be determined based on engineering requirements. For example, fire-resistant cable trays often require re inspection of their fire resistance performance due to the involvement of fire safety inspections.

  规范依据

  Standard basis

  标准如《电控配电用电缆桥架》(/T 10216-2013)和《建筑电气工程施工质量验收规范》(GB 50303-2023)明确桥架的板材厚度、防腐层及耐火性能等要求,部分项目需抽样送检。

  National standards such as "Cable Trays for Electrical Control and Distribution" (/T 10216-2013) and "Code for Acceptance of Construction Quality of Building Electrical Engineering" (GB 50303-2023) specify the requirements for the thickness, anti-corrosion layer, and fire resistance of cable trays, and some projects require sampling and inspection.

  地方规范(如天津的DB/T29-209-2020)可能对桥架复检有额外要求,需结合当地住建部门或质监站的规定执行。

  Local regulations (such as DB/T29-209-2020 in Tianjin) may have additional requirements for the re inspection of cable trays, which need to be implemented in conjunction with the regulations of the local housing and construction department or quality supervision station.

  特殊情况

  special circumstances

  防火桥架:若设计或监理要求,必须复检耐火极限及涂层附着力。

  Fireproof bridge: If required by the design or supervision, the fire resistance limit and coating adhesion must be rechecked.

  镀锌桥架:检测锌层厚度(如65μm)及附着力,避免因腐蚀影响性。

  Galvanized bridge frame: Focus on testing the thickness of the zinc layer (such as 65 μ m) and adhesion to avoid affecting safety due to corrosion.

  新工艺或争议材料:生产厂家变更工艺或材料时,需重新检测以验证合规性。

  New processes or disputed materials: When the manufacturer changes the process or material, retesting is required to verify compliance.

  验收流程

  Acceptance process

  进场时需核查合格证、型式检验报告,并按批次抽样(如每3000米抽3段)送CMA资质机构检测。复验不合格的批次需退场处理。

  When entering the site, it is necessary to verify the certificate of conformity and type inspection report, and sample according to batches (such as 3 sections per 3000 meters) and send them to CMA qualification institutions for testing. The batches that fail the re inspection need to be removed from the site for processing.

  结论:桥架是否需要复试送检需结合工程重要性、当地规范及监理要求综合判断。建议提前与相关部门沟通,明确检测项目和标准,避免验收争议。

  Conclusion: Whether the bridge frame needs to be retested and inspected should be comprehensively judged based on the importance of the project, local regulations, and supervisory requirements. It is recommended to communicate with relevant departments in advance to clarify the testing items and standards, in order to avoid acceptance disputes.

  桥架300米需要复检几次?

  How many times do we need to recheck the 300 meter bridge?

  复检次数可参考以下方案:

  The number of retests can refer to the following plan:

  日常检查

  routine inspection

  每月进行一次简单目视检查,查看桥架外观、电缆状态及连接件是否正常1。

  Conduct a simple visual inspection once a month, focusing on checking the appearance of the bridge, the condition of the cables, and whether the connectors are normal.

  定期维护

  regular maintenance

  普通环境 :每6个月检查一次,包括清洁、防火涂层检测、连接件紧固及电缆接地系统检查1。

  Normal environment: Conduct a comprehensive inspection every 6 months, including cleaning, fireproof coating testing, connection fastening, and cable grounding system inspection.

  恶劣环境 (如高湿度、高腐蚀或室外环境):每3个月检查一次,因环境因素会加速桥架损耗1。

  Adverse environments (such as high humidity, high corrosion, or outdoor environments): Conduct a comprehensive inspection every 3 months, as environmental factors can accelerate bridge wear and tear.

  年度综合检查

  Annual comprehensive inspection

  每年少进行一次检测,涵盖所有维护项目,并可根据实际使用情况调整频率。

  Conduct a comprehensive inspection at least once a year, covering all maintenance items, and adjust the frequency according to actual usage.

  总结 :

  Summary:

  若环境普通,300米桥架建议每年复检1次(含日常检查)。

  If the environment is normal, it is recommended to recheck the 300 meter bridge once a year (including daily inspections).

  若处于恶劣环境,需每3个月复检1次(日常检查+定期维护)。

  If in a harsh environment, it is necessary to conduct a re inspection every 3 months (daily inspection+regular maintenance).

  建议结合实际环境条件及使用频率,制定更详细的维护计划。

  Suggest developing a more detailed maintenance plan based on actual environmental conditions and usage frequency.

  本文由 山东电缆桥架   友情奉献.更多有关的知识请点击  http://www.sddlqj.cn/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

  This article is a friendly contribution from Shandong Cable Bridge For more related knowledge, please click http://www.sddlqj.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.

工程案例 / Case Show
  • 济南火车站 济南火车站
  • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
  • 山东工艺美院 山东工艺美院
  • 公安厅服务展示 公安厅服务展示