济南苏鑫电缆桥架有限公司
客户咨询热线
0531-85767688
售后热线:15668327566
联系基地:山东省 德州市协同发展产业园D06幢
文章来源:https://www.sddlqj.cn/ 作者:电缆桥架厂家发布时间:2025-12-13 浏览次数:1
电缆桥架的承重能力可以通过以下公式来计算:
The maximum load-bearing capacity of cable trays can be calculated using the following formula:
G总=n1q1+n2q2+n3q3+……?
G total=n1q1+n2q2+n3q3+
其中:
among which
?G总?:电缆桥架的总荷载,即电缆桥架所能承受的重量。
G total: The total load of the cable tray, which is the maximum weight that the cable tray can bear.
?q1、q2、q3……?:每根电缆的单位重量(kg/m),这取决于电缆的型号、规格和材料。
Q1, q2, q3...: The unit weight of each cable (kg/m) depends on the cable model, specifications, and material.
?n1、n2、n3……?:相应电缆的根数,即每种电缆在电缆桥架内的数量。
N1, n2, n3...: The number of corresponding cables, that is, the quantity of each type of cable in the cable tray.
在计算时,需要注意以下几点:
When calculating, the following points should be noted:
?允许载荷?:计算得到的G总应小于电缆桥架的允许载荷。电缆桥架的允许载荷通常会在其规格说明书中给出,或者可以通过参考载荷曲线图表来确定。
Allowable load: The calculated G should be less than the allowable load of the cable tray. The allowable load of cable trays is usually given in their specification sheet or can be determined by referring to load curve charts.
?附加载荷?:当电缆桥架在室外或带有护罩时,还需要考虑水载、风载等附加载荷的影响。这些附加载荷可能会增加电缆桥架的实际负荷,因此在计算时需要将其考虑在内。
Additional loads: When the cable tray is outdoors or with a protective cover, the influence of additional loads such as water and wind loads also needs to be considered. These additional loads may increase the actual load on the cable tray, so they need to be taken into account when calculating.
?裕量?:为了确保电缆桥架的使用,通常会在计算得到的承重能力基础上增加一个裕量。这个裕量的大小取决于具体的应用场景和要求。
Safety margin: In order to ensure the safe use of cable trays, an additional safety margin is usually added to the calculated maximum load-bearing capacity. The size of this safety margin depends on the specific application scenario and safety requirements.
本文由 济南电缆桥架 友情奉献.更多有关的知识请点击 http://www.sddlqj.cn/ 真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendly contribution from Jinan Cable Bridge For more related knowledge, please click http://www.sddlqj.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
如何计算济南电缆桥架的承重能力?
电缆桥架的承重能力可以通过以下公式来计算: The maximum load-bearing capacity of cable trays can be calculated using
TIME:2025-12-13