欢迎您光临济南苏鑫电缆桥架有限公司网站!
联系济南苏鑫电缆桥架有限公司 / Contact us

济南苏鑫电缆桥架有限公司

客户咨询热线

0531-85767688

售后热线:15668327566

联系基地:山东省 德州市协同发展产业园D06幢

电缆桥架的分类与相关安装要求

文章来源:http://www.sddlqj.cn/   作者:电缆桥架厂家发布时间:2022-09-25 浏览次数:11

返回:行业动态
电缆桥架可分为槽式、托盘式和梯式、网式等。它由支架、支架臂和安装附件组成。那电缆桥架可以分为哪几种?安装有什么要求吗?下面山东电缆桥架厂家为您讲解。
Cable tray can be divided into trough type, tray type, ladder type, net type, etc. It consists of bracket, bracket arm and installation accessories. What are the types of cable tray? Are there any requirements for installation? Next, Shandong cable tray manufacturer will explain to you.
电缆槽大致可分为以下五类:
Cable trays can be roughly divided into the following five categories:
槽式电缆桥架是一种全封闭的电缆桥架,可以很好的控制电缆的屏蔽干扰,对重腐蚀环境下的环境电缆起到很好的保护作用和效果。
The trough type cable tray is a fully enclosed cable tray, which can well control the shielding interference of the cable and play a good role in protecting the environmental cable in the heavily corrosive environment.
t型阶梯式电缆桥架适用于敷设大直径电缆,可同时敷设高低压电力电缆。这种电缆桥架具有重量轻、成本低、散热通风好的特点。
T type ladder cable tray is suitable for laying large diameter cables, and can be used for laying high and low voltage power cables at the same time. The cable tray has the advantages of light weight, low cost and good heat dissipation and ventilation.
大跨度电缆桥架一般由拉挤玻璃钢型材组装而成,可应用于电力电缆、控制电缆、照明电缆及附件等。
Large span cable tray is generally assembled by pultruded FRP profiles, which can be used for power cables, control cables, lighting cables and accessories.
山东电缆桥架厂家
组合式电缆桥架只需制作弯头、三通等附件,可以通过管道在任何位置引出,无需钻孔或焊接。不仅便于生产运输,而且便于安装施工。是电缆桥架中理想的产品。
The combined cable tray only needs to make elbows, tees and other accessories, which can be led out at any position through pipes without drilling or welding. It is not only convenient for production and transportation, but also convenient for installation and construction. It is an ideal product for cable tray.
电缆槽这种电缆桥架广泛应用于石油、化工、轻工等领域,具有很强的通用性。这种电缆桥架不仅适用于电力电缆的安装,也适用于控制电缆的敷设。
The cable tray is widely used in petroleum, chemical industry, light industry and other fields, with strong universality. This cable tray is not only suitable for the installation of power cables, but also for the laying of control cables.
安装要求:
Installation requirements:
1.当电缆桥架遇到需要用电的设备时,距离应大于0.5米。
1. When the cable tray meets the equipment requiring electricity, the distance shall be greater than 0.5m.
2.当两组电缆在同一高度平行时,它们之间的距离应大于0.6米。
2. When two groups of cables are parallel at the same height, the distance between them should be greater than 0.6 m.
3.在线槽内敷设电缆时,线槽内的电缆应平直。
3. When laying cables in trunking, the cables in trunking shall be straight.
4.安装在吊顶内时,槽盖开启的一侧应留有80mm的垂直间隙,槽段利用率应小于百分之五十。
4. When installed in the suspended ceiling, a vertical clearance of 80mm shall be left on the open side of the slot cover, and the utilization rate of the slot section shall be less than 50%.
这篇文章主要讲述了电缆桥架的分类及安装要求,相信大家在看完之后会对电缆桥架有一定的了解,希望能对大家产生帮助。更多相关内容就来我们网站http://www.sddlqj.cn咨询吧!
This article mainly describes the classification and installation requirements of cable tray. I believe you will have a certain understanding of cable tray after reading it, and I hope it can help you. More relevant content will come to our website http://www.sddlqj.cn Consult!
工程案例 / Case Show
  • 济南火车站 济南火车站
  • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
  • 山东工艺美院 山东工艺美院
  • 公安厅服务展示 公安厅服务展示
资讯 / Recommended news
  • 电缆桥架的选型需要留意什么?电缆桥架的选型需要留意什么?

    1、在工程设计中,电缆桥架的布置应根据经济公道性、技术可行性、运行性等因素综合比较,以确定方案,还要充分满足施工安装、维护检验及电缆敷设的要求。1. In engineering design

    TIME:2024-03-29