In order to better improve the quality and service life of bridge products, it is necessary to make a precise specification for each link of construction and precautions. In the time after installation, sometimes there will be some faults in the cable tray. Don't panic when there are faults. Take a careful look at which of the following categories, and then take corresponding measures according to the situation!
1. The stainless steel bridge is burnt out in the whole cable or a phase is burnt out. Such a fault causes the distribution cabinet to operate the current relay, and the fault is quite serious when the cable is damaged.
2. In addition, for the safety of power cables. Take the large allowable bending radius of the cable as the criterion at the corner. You can go to the field to investigate. The partner must fully understand whether the cable tray manufacturer needs to have the social production management ability, the quality of raw materials, the technical means of product safety inspection, and whether the business certificate is complete.
3. The installation location of cable tray shall be selected to facilitate laying. Generally, it should be near the beginning and end of the cable.
In addition, the maintenance of Shandong cable tray equipment is very important, which directly affects the service life of the equipment. After removing the cable tray equipment, pay attention to placing the removed parts on the workbench or support. After the parts are disassembled, they should be marked to avoid confusion and inconvenience during assembly. Remove bolts, nuts, washers and other components that need to be cleaned in kerosene or hot soda solution, clean all components, and reassemble before the used cable tray equipment appears.
In daily maintenance and overhaul, the place with gears should be often coated with lubricating oil to ensure normal operation. Whether it is cable tray equipment or cold bending forming equipment, check the machine every day. In production, we should also pay attention to debugging and cleaning. Strictly abide by production requirements, and solve problems in time to avoid major problems.
For example, although there are differences between bridge equipment and cold bending equipment, their working principle is the same, so we can check whether the force is uniform. Reasonable design and configuration. Especially in the following procedures, the deformation should not be too large. Small deformation can reduce the fault. Regular maintenance of cable tray equipment according to regulations can improve its performance and prolong its service life.
For the cable tray industry, it is also essential to strengthen industry supervision and management. The industry should establish a federation to be responsible for regular sampling inspection of cable trays for quality inspection, and also need to formulate a punishment and reward system to encourage cable tray manufacturers to produce high-quality cable tray products. You can follow our website for more relevant content http://www.sddlqj.cn Consult and understand.