欢迎您光临济南苏鑫电缆桥架有限公司网站!
联系济南苏鑫电缆桥架有限公司 / Contact us

济南苏鑫电缆桥架有限公司

客户统一咨询热线

0531-85767688

售后热线:137-0540-5406

联系基地:山东省 德州市协同发展产业园D06幢

当前位置:首页 > 新闻中心 > 常见问题 >

电缆桥架的六点安装规范

文章来源:http://www.sddlqj.cn/   作者:电缆桥架厂家发布时间:2022-10-26 浏览次数:

返回:常见问题
买完电缆桥架后,很多小伙伴会对安装施工方面感到困惑,不知道从哪一步开始,其实济南电缆桥架厂家一般都会负责敷设安装,下面给大家介绍下电缆桥架的六点安装规范。
After buying the cable tray, many small partners will be confused about the installation and construction. They don't know where to start. In fact, Jinan cable tray manufacturers are generally responsible for laying and installation. Here are six installation specifications for cable tray.
1、电缆桥架是一个无专门的技术人员引导的网络布线工程,产品的尺寸下,很多商家的生产过程都是不一样的,欠缺实用性是一个大缺点,在规划型号选择中,应该根据工程项目的规定,科学合理的选中所需所使用的零配件。
1. The cable tray is a network cabling project without the guidance of special technicians. The production process of many businesses is different under the size of the product. Lack of practicality is a major disadvantage. In the selection of planning models, the required spare parts should be selected scientifically and reasonably according to the provisions of the project.
2、在电缆桥架和电力工程电缆桥架共用时,需要将电力工程电缆和弱电电缆分离组装,中间还要用挡板隔开。
2. When the cable tray is shared with the cable tray of the power project, the cable of the power project and the weak current cable need to be separated and assembled, and the middle should be separated by a baffle.
3、在弱电电缆和低压电缆共用时,需要做到挑选那类有屏蔽掉的功能弱电电缆
3. When the weak current cable and low-voltage cable are shared, it is necessary to select the weak current cable with shielding function
济南电缆桥架厂家
4、假如是由室外电缆桥架进到工程建筑内是,它倾斜度不可以低于1/100,而和电器设备交越时,不可以低于0.5m的净距。
4. If it is from the outdoor cable tray to the engineering building, its gradient shall not be less than 1/100, and when it is crossed with electrical equipment, its clear distance shall not be less than 0.5m.
5、电缆桥架与电器设备交越时,在其中的净距不低于0.5m。
5. The clear distance between cable tray and electrical equipment shall not be less than 0.5m.
6、须在在平行面图中画成电缆桥架的开端、转弯点、分支点、调节点及其终点站。座标的定位点、规格都会进行精确的标志。绘制电缆桥架的铺设轴侧图,能够促使原材料的费用预算统计分析更加精确。
6. The beginning, turning point, branch point, adjustment point and terminal of cable tray shall be drawn in the parallel plan. The positioning points and specifications of the coordinates will be accurately marked. Drawing the laying axial side diagram of cable bridge can promote the cost budget statistics and analysis of raw materials to be more accurate.
电缆桥架的六点安装规范就讲解到这里了,您对此有什么想法可以随时来我们网站http://www.sddlqj.cn进行咨询!
This is the end of the six point installation specification for cable tray. You can come to our website at any time if you have any ideas http://www.sddlqj.cn Consult!
工程案例 / Case Show
  • 济南火车站 济南火车站
  • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
  • 山东工艺美院 山东工艺美院
  • 公安厅服务展示 公安厅服务展示