欢迎您光临济南苏鑫电缆桥架有限公司网站!
联系济南苏鑫电缆桥架有限公司 / Contact us

济南苏鑫电缆桥架有限公司

客户统一咨询热线

0531-85767688

售后热线:137-0540-5406

联系基地:山东省 德州市协同发展产业园D06幢

当前位置:首页 > 新闻中心 > 常见问题 >

电缆桥架托臂支架和护罩的作用

文章来源:http://www.sddlqj.cn/   作者:电缆桥架厂家发布时间:2022-10-26 浏览次数:

返回:常见问题
电缆桥架的托臂支架和护罩是用来做什么的呢?下面由山东电缆桥架小编为您做一下说明。
What are the bracket and shield of cable tray used for? The following is a brief description of Shandong cable tray.
电缆桥架的托臂支架是支撑电缆桥架和电缆的主要部件,它由立柱、立柱底座、托臂等组成。我厂生产的托臂支架是根据日本、德国的同类产品设计而成;
The bracket of the cable tray is the main part supporting the cable tray and cable, which is composed of column, column base, bracket, etc. The arm bracket produced by our factory is designed according to similar products in Japan and Germany;
它具有结构简单、重量轻、成本低、强度大、造型美等优点,可满足不同环境条件(工艺管道架上、楼板下、墙壁上、电缆沟内)安装成不同形式(悬吊式、直立式、侧壁式、单边、多边和多层)等的需要。
It has the advantages of simple structure, light weight, low cost, large strength, beautiful shape, etc., and can meet the needs of different environmental conditions (above the process pipe rack, under the floor, on the wall, in the cable trench) to install in different forms (suspended, vertical, side wall, unilateral, multilateral and multi-layer).
电缆桥架如需多层重载荷吊装时,要尽量采取双边敷设、避免偏载过大。托臂支架部分其表面处理有电镀锌、热度锌、喷漆、喷塑四种。
If multi-layer heavy load hoisting is required for cable bridge, double side laying shall be adopted as far as possible to avoid excessive eccentric load. The surface treatment of the bracket part of the corbel can be divided into four types: galvanization, hot galvanizing, painting and plastic spraying.
山东电缆桥架
电缆桥架护罩是一种用于电力或通讯电缆走线工程的电缆桥架上的护罩,由钢板压制而成,该电缆桥架护罩的顶面和顶面两边的折边都为凹凸面形状,顶面上的凸面和凹面相间连续设置。
The cable tray cover is a cover on the cable tray used for power or communication cable routing engineering, which is pressed by steel plates. The top surface and the folding edges on both sides of the top surface of the cable tray cover are concave and convex, and the convex and concave surfaces on the top surface are set continuously.
每一个凸面和凹面单元的两头向同一方向弯曲成折边,凸面与凹面之间的高差小于8毫米,新型的高强度结构电缆桥架护罩,由于整个盖平面采用的凹凸状的结构造型,因此增加了该护罩的钢性钢度。
The two ends of each convex and concave unit are bent in the same direction to form a folded edge, and the height difference between the convex and concave is less than 8 mm. The new high-strength structure cable bridge shield has increased the rigidity of the shield due to the concave and convex structural modeling used in the entire cover plane.
由于钢性强度的提高,可以采用较薄的材料制造,如采用同样的板厚其强度超过原来的两倍以上,其优点主要是降低成本、产品不易变形。
Due to the improvement of steel strength, thinner materials can be used for manufacturing. If the same plate thickness is used, its strength is more than twice of the original strength. Its advantages are mainly to reduce costs and prevent products from deformation.
电缆桥架托臂支架和护罩的作用就讲解到这里了,您对此有什么想咨询的问题可以随时来我们网站http://www.sddlqj.cn了解!
This is the end of the function of the cable bridge bracket and shield. If you have any questions about this, you can come to our website at any time http://www.sddlqj.cn Understand!
工程案例 / Case Show
  • 济南火车站 济南火车站
  • 曲阜孔子文化会展中心 曲阜孔子文化会展中心
  • 山东工艺美院 山东工艺美院
  • 公安厅服务展示 公安厅服务展示